Required Practical 20: Waves | AQA GCSE Science | The Science Department

About this practical and its aim

Aim

Measure wavelength, frequency and wave speed in water and in a solid medium.

Introduction

Waves is a subject that is helped massively if you can visualise what is happening. By using a ripple tank, you can see the waves, measure wavelength, wave speed and frequency and even visualise red-shift. By showing a stationary wave on a stretched wire, you can see the wave forms which will help to explain resonance.

The science behind the practical

Wave speed depends on frequency and wavelength: v = fλ. Ripple tanks and vibrating strings can display wave patterns.

Key things to remember

Measure several wavelengths and take an average; use equipment suitable for the type of wave.

Equipment and apparatus

  • Ripple tank

  • shallow water

  • wave generator

  • lamp

  • ruler

  • signal generator

  • vibrating string and pulley/weights

  • frequency meter

Practical equipment diagram

Method: How to carry out the experiment

  1. For this required practical, you need to use a ripple tank or see one working. They are not the easiest pieces of apparatus and I am not a huge fan of them. As well as seeing the ripple tank in class, please experiment with a ripple tank simulator.

  2. The ripple tank is set up on an overhead projector. Turn on the light and ensure that it is in focus on the white board. Students will not be allowed to add/drain water due to its proximity to the lights.

  3. On the whiteboard, mark out the dimensions of the projected tank and create a scaled rule

  4. Turn on the wave generator and record the settings.

  5. Use the scale on the board to measure the wavelength

  6. Using a stop clock, measure the frequency

  7. Using the stop clock, measure the wave speed

  8. Assess the accuracy of your measurements by seeing if they fit into the equation - Frequency = Wave Speed x Wavelength

  9. Repeat for other settings/frequencies

  10. For the second part of this, you will be investigating a stationary wave. The equipment will be setup for you to use.

  11. Turn on the generator and adjust the frequency until you have a half wavelength stationary wave. Record this frequency and measure/record the length of the stationary wave (this will be half of the wavelength)

  12. Adjust until you find (and record) a full wavelength and any others that you can achieve.

Variables and fair testing

Type of variableWhat is measured or controlled?
Independent variable

Frequency set by a vibrator

Dependent variable

Wavelength and calculated wave speed

Control variables

Water depth; tension for string; measurement scale; vibration amplitude

Safety and managing risks

Follow your teacher's instructions and your school's risk assessment. This page is not a substitute for a formal risk assessment.

HazardRiskPrecaution

Water with electrical equipment

Electric shock

Use correctly designed low-voltage ripple-tank equipment; keep connectors dry.

Vibrating wire under tension

Snap-back or falling masses

Secure string, clamps and hanging masses.

Results, calculations and analysis

Recording, presenting and interpreting results

Record frequency (Hz), wavelength (m), and speed (m/s) for each apparatus.

Calculations

Wave speed = frequency × wavelength.

Conclusions, accuracy and evaluation

Drawing a conclusion

Wave speed can be determined from wavelength and frequency; measurement method varies with the medium.

Evaluating the investigation

Measure across multiple waves, reduce reflections and maintain water depth or string tension.

More to learn

Measure several waves

For greater precision, measure the length occupied by five or more complete wavelengths and divide by the number of waves.

Common exam mistake

Convert wavelengths in cm or mm to metres before calculating speed in m/s.

GCSE examination practice

Answer each question in full before opening the model answer. Check your work against the marking points and look for scientific key words.

Question 1 (2 marks)

Calculation

A wave frequency is 12 Hz and wavelength 0.15 m. Calculate speed.

Show model answer / marking points

v = fλ = 12 × 0.15 = 1.8 m/s (2).

Question 2 (2 marks)

Method

Why measure the distance across several waves?

Show model answer / marking points

Reduces the percentage uncertainty in wavelength (1); divide total distance by number of wavelengths (1).

Question 3 (2 marks)

Knowledge

State the units of wavelength and frequency.

Show model answer / marking points

Metres (m) (1), hertz (Hz) (1).

Question 4 (2 marks)

Evaluation

Suggest one improvement to make the investigation more reliable and explain why it helps.

Show model answer / marking points

Repeat measurements and calculate a mean (1), reducing the influence of random variation/anomalies (1). Alternative valid improvement specific to the experiment with explanation can gain both marks.

This page was updated on: 26th June 2026